Upon detecting a potentially hazardous situation, use the fire alarm pull station promptly to minimize the loss of life and property due to fire. Once the alarm has activated, contact emergency responders by calling 911 from a safe location.
Single-action pull stations are simple in their design — they are fitted in a wall without any coverings or special activation mechanisms. These pull stations are activated by pulling the handle down.Nov 30, 2020
Do not wait for a smoke detector or the sprinkler system to operate. If you discover a problem, take appropriate action.
A fire alarm pull station is an active fire protection device, usually wall-mounted, that, when activated, initiates an alarm on a fire alarm system.
According to NFPA 72, each pull station must be installed between 42 and 48 inches from the floor to ensure easy accessibility for people in wheelchairs. In addition, it needs to be placed in a location that's from free obstacles. This way any individual may access the pull station in the event of an emergency.Nov 30, 2020
Additionally, a fire alarm pull station needs to be red and in a location that is completely unobstructed from obstacles. This way, anyone can access the pull station in an emergency.Sep 24, 2020
The Fire Alarm System can be activated in the following ways:1. ' ... A rise in temperature activates an Automatic Heat Detector.Smoke activates an Automatic Smoke Detector.Automatic Smoke Detectors can be Air Sampling type, which have pipes connected to the Boxed Detector.More items...
1:1116:46How to Reset a Fire Alarm Pull Station - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut they all pretty much reset the same they pull just like that you pull down and then to resetMoreBut they all pretty much reset the same they pull just like that you pull down and then to reset it's actually really easy you take the simplex. Key. Put it in turn it.
4:107:06All About Fire Alarm Pull Stations - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne but to properly test it you have to first open it up which is going to set off the alarm. TakeMoreOne but to properly test it you have to first open it up which is going to set off the alarm. Take out your plastic brake. Close it back up. And then pull it.
A pull station is basically a manual fire alarm that works due to human intervention. This pull station utilizes the alarm and sound system present in the building to alert people about a dangerous situation.
Manual fire alarms are activated with manual call points or pull stations. There is no reason for a fire alarm system to exclude one or the other. Both can be included in the same system. Conventional fire alarms work as one unit and cannot pinpoint the exact area of activation unless inspected.
As you may know, a manual pull-station is a manual fire alarm initiating device that is activated by pulling a lever. The pulling level can be designed to have a single-action mechanism, or a dual-action mechanism.